home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Hackers Underworld 2: Forbidden Knowledge
/
Hackers Underworld 2: Forbidden Knowledge.iso
/
PHREAK
/
MOTOROLA.TXT
< prev
next >
Wrap
Text File
|
1994-07-17
|
23KB
|
498 lines
Programming Your Personal or Portable Cellular Telephone
Programming Manual - Most Motorola Transportables
68P81155E16-D 6/15/89-RGC CONTENTS
Introduction ..................................................3
Features to be Programmed .....................................3
Obtaining System Registration Data ............................6
Programming Your Telephone ....................................6
Determine the Initial Programming Sequence ...................6
Initial Steps ............................................... 7
Programming Procedure ........................................8
Reviewing of NAM Programming ................................10
Storing the Information .....................................10
Programming the Second Telephone Number .....................10
Before Calling for Service ...................................11
Personal or Portable Cellular Telephone Battery Chargers .....12
Personal Telephone Battery Charger ..........................12
Portable Telephone Battery Charger ..........................12
Safety Information ..........................................12
Portable Charger Operation ..................................13
Portable Charger Maintenance ................................13
Telephone Number Label Installation Instructions .............13
NAM Programming Data Table ...................................15
Rules, Regu1ations, and Precautions ..........................17
General Safety lnformation ...................................18
1. INTRODUCTION
Your cellular phone contains a special memory which retains information
about the phone's individual characteristics, such as its assigned
telephone number, system identification number, and other information that
is necessary for cellular operation. This special memory is known as the
Number Assignment Module (NAM). You can program the phone yourself, if the
phone has not already been programmed where you purchased it. You can also
reprogram the phone yourself should you wish to change some of the
features already selected for the NAM.
The programming of the NAM is performed after you have contacted your
cellular system operator (or operators) for the necessary information as
described below. Enter the information received from your cellular system
operator in the NAM Programming Data Table (included in this manual)
before programming the NAM of your cellular telephone. Follow your system
operator's instructions regarding each NAM information entry. Incorrect
NAM entries can cause your cellular telephone to operate improperly or not
at all.
Your cellular telephone can be programmed up to three times. After that,
it must be reset at a Motorola-authorized service facility.
Be sure to read through this entire manual before attempting to program
your phone.
2. FEATURES TO BE PROGRAMMED
You must request seven pieces of information from the cellular system
operator to allow you to program your cellular phone. You provide the
remaining information. Write all of this programming information on the
NAM Programming Data Table provided on page 15 of this manual before
commencing the procedure. Incorrect NAM entries can cause your cellular
telephone to operate improperly or not at all. The required information is:
* System Identification (SID) Code (S-digits)--Indicates your Home
system. Enter O's into the left-most unused positions. Provided by
the system operator.
* Cellular Telephone Number (10 digits)--Used in the same manner
as a standard land-line telephone. The mobile phone number and
the Electronic Serial Number are checked against each other by the
cellular system each time a call is placed or received. Provided by the
system operator.
* Station Class Code (2 digits)--06 or 14 for most personal or portable
telephones. Even though your phone has extended bandwidth capability (832
channel capacity), the cellular system operator may require your station
class code to remain 06. The code should be 14 if 832 channel operation is
allowed. (If you have the convertible accessory, and wish it to be
programmed with a separate phone number for standalone operation, the
class code mark will be set to 12 for the convertible accessory--with the
personal telephone disconnected) Provided by the system operator.
* Access Overload Class (2 digits)--Provided by the system operator.
* Group ID Mark (2-digits)--Provided by the system operator.
* Security Code (6-digits)--The six-digit security code allows the user to
restrict his calls in certain ways and it permits other advanced security
measures. Refer to your operator's manual for further details. Select any
6-digit code that you will remember, but one that will not be easily
compromised.
* Unlock Code (3-digits)--The 3-digit unlock code unlocks the telephone
after it has been locked. Locking the telephone allows you to prevent
unauthorized usage. With many models, this number can be programmed as
often as desired. Consult your user manual. Select any convenient 3-digit
number.
* Initial Paging Channel (4 digits)--Use a leading zero if required.
(Example: Channel 334 is entered as 0334.) Provided by the system
operator.
* Option Bits (6 digits)--This programming step allows you to program six
separate features in one step. Each feature is either selected or
cancelled by assigning a value of 1 or 0. The six individual single-digit
features combine to form a six-digit code which is entered as one step. If
any of the features is to be changed, the entire six-bit word must be
reentered.
--Internal Speaker-- This feature is normally selected by programming 0.
However, if you purchased the Convertible Accessory and it contains a
separate External Speaker/VSP unit, cancel the internal speaker feature by
programming 1.
--Local Use--This feature is normally selected by programming 1.
Your system operator can tell you if you need to cancel this feature
by programming 0.
--MIN Mark--This feature is normally not used and is assigned a
value of 0. Your system operator can tell you if you need to select
this feature. To select, program 1.
--Auto Recall--This feature is always set at 1.
--Second Phone Number--This feature is normally not used and is
assigned a value of 0. However, if you have arranged with a cellular
system operator to have a second phone number, select this feature by
programming 1.
--Diversity--This feature is always set at O for the portable/personal
telephone used alone. (If you have a convertible accessory, and it has two
external antennas, select this feature by programming 1.)
* Option Bits (3 digits)--This programming step allows you to program an
additional three separate features in one step. Each feature is either
selected or cancelled with the digit 1 or 0. The three individual
single-digit features combine to form a three-digit code which is entered
as one step. If any of the features is to be changed, the entire three-bit
word must be reentered.
--Long Tone DTMF--Certain electronic devices, such as answering machines,
are not able to decode the normal DTMF tones because the telephone system
standard duration is too short. The Long Tone DTMF feature allows access
to answering machines and other similar devices by transmitting the DTMF
tone for as long as the key is depressed. This feature is normally not
used and is assigned a value of 0. However, you can select Long Tone DTMF
by programmlng 1.
NOTE
Personal or portable models with a MENU key can more flexibly select and
cancel this feature through the Menu. However to allow Menu control of the
function it must be cancelled in the NAM by setting this bit to 0. If
Long Tone DTMF is selected in the NAM with a 1 in this bit, it cannot be
reversed throughh the Menu.
--Future Use--This feature is always set at 0.
--Eight-Hour Timeout (Convertible only)--Personal or portable telephones
with the convertible accessory can normally be left active in the vehicle
for eight hours with the ignition o